How to Install a Certificate on SZ/vSZ? Generate the CSR from any node, or the same can be generated from a third part device: System >> Certificates >> CSR >> Generate Fill in the details and submit the same to a CA authority Now, you will be able...
This article explains setting up a Cisco Wireless Controller (9800 IOS-XE) with Cloudpath Enrollment System for redirection of on-boarding SSID.NOTE: This document does not include Cloudpath workflow setup, it is assumed that workflow is configured o...
Summary: In this article we will look into the configuration involved in setting up Guest portal authentication with the Self Sign IN using Google Step 1: Setting up SSID with the Captive Portal - Self Sign IN Step 2: Select the Self Sign In under ...
As a Ruckus TAC engineer, I would like to share my experience with the process of converting AP from SmartZone to the Ruckus cloud. APs running firmware 3.6 or later versions are enabled for the cloud discovery process and can migrate to cloud withou...
Note: Pressing and holding of the reset button will not factory reset the device, this will only restart the device Button 4 is called the f/d button which factory-defaults / factory-resets the devicePress and hold for 10 seconds to activate the rese...
Summary: In this community article, we will look at the steps involved in setting up Guest Portal authentication via Social Media Login, in this case via LinkedIn. Question: How is this different from traditional Guest Access authentication methods? ...
Introduction : This article is focused on explaining the requirement and process to move AP's from your existing ZD platform to virtual platform "vSZ/SZ". This would cover your pre-requisite and supported user scenario's. Since there are a lot diff...
vSZ requires enough hardware resources to sustain the service. vSZ cannot support deployment in low performance hypervisor. During the time of deployment or upgrade it is always a good practice to reconfirm and validate the resource requirements of v...
Please make sure that the Smart Zone controller is running the recommended version 5.2.x version as this procedure is written with that assumption. Step 1: Testing connectivity and firewall ports for cloud connectivity Access and setup the Ruckus Clo...
