Hello All, This is an important security announcement. CVE numberCVE-2023-49225SeverityMediumWorkaroundAvailableFixAvailable A vulnerability in the web-based management interface of the RUCKUS AP product line could allow anunauthenticated, remote att...
How can I avoid certain channels being selected by client connecting to Zone Director managed APs?Customer EnvironmentZone Director managed AP network where you would like to blacklist certain channels. This is mainly applies for ZD version below 9.5...
In my work as a TAC support agent for RUCKUS Wireless products, I've recently encountered cases where iPhone and MacBook users complain of frequent disconnections from the wireless network. I've been able to resolve those cases by following the steps...
Connecting an ICX to the Ruckus controller vSZ or cloud Pre-requisites In this document will be found the best practice and support documentation to add a new ICX to the controller for the first time. 1: Your running version must be UFI, can be che...
This information pertains to general knowledge for utilization within the context of ICX-Unleashed-SZ-vSZ. Initially, need to connect with the Server Manager. Subsequently, we will install the DHCP feature. The installation choices are discretionary;...
The DHCP option 43 is one of many methods for the RUCKUS AP to discover its controller.This option is configured in the DHCP server and must be masked. Also, the vendor code and the length of the IP address must be specified in HEX.RUCKUS vendor code...
How Standalone APs Learn Controller AddressesIf your APs will be managed by a controller, you will need some way to ensure that the APs can discover the controller on the network. There are several different ways to do this, and the specific controll...
Maximize efficiency by running CLI commands on multiple APs simultaneously. RUCKUS ZD's 'remote_ap_cli' command in debug mode empowers you to take command effortlessly:1. Access debug mode:ruckus> enaruckus# debugYou have all rights in this mode.ruck...
Issue observed: APs with more than one ethernet port where the second port is capable of providing higher speeds (above 1000 Mbps) is unable to negotiate over 1000 Mbps speed with its uplink switch.Prerequisite: Switch should also be capable of provi...
