We have often come across a situation where we had to upload the wildcard certificate on the SmartZone controller. The reason, we do not want to get: Certificate error while accessing the management GUI of controller Certificate error w...
Hey all, I want to take a look at building a stack from scratch. There are many ways to build, edit and manipulate stack units. Extensive details can be found in your respective stacking guide. In this example, I will be using 8095 software and tha...
Hey all, Let's take look at creating LAGs (LACP and static). LACP (802.3ad) is the most common link-aggregation method. We also offer static LAGs. To create an LACP LAG named 'testlag' with an auto-generated id, you would issue the following: I...
Hey all, I wanted to take a moment to look at spanning tree. By default, ICX switches run 802.1d spanning tree on a per-vlan basis. Ideally, we want to use a protocol with faster convergence such as rapid spanning tree (802.1w). I will go through ...
In this self-help discussion, I will explain the precautions that needs to be taken before planning for an upgrade activity. There can be many reasons for an upgrade failure to occur during the upgrade activity. It can be a network related issue/it...
In this self-help discussion, I will explain how we can reset Unleashed network (mainly customers having more than 1 AP in Unleashed network). This may require when customer doesn’t know the access credentials for admin web console due to change in o...
In this self-help discussion, I will explain how to determine controller upgrade compatibility, supported APs and other useful information. Follow the below steps: Note down the below details of your current controller setup. Controller type (virtu...
Hey All, Have you ever wondered what code Ruckus recommends you run on your ICX? You are in luck. Each product support page has a built-in recommendation or recommendations. While these recommendations will not cover every scenario or customer, it ...
