When dealing with a corrupted flash or related issues, follow these steps to troubleshoot and resolve the problem. Boot Loop Process When a unit is stuck in a boot loop and fails to stabilize, the first step is to console into the unit directly and r...
Summary:This Article explains about how to setup QinQ in ICX switches. QinQ setup in used in networks like service provider, ISP’s etc. to help mange the network easily and provide more sublets independent of each other.Question:How to configure QinQ...
Summary:This Article explains about how to setup SNMPv2 and SNMPv3 Traps in ICX switches. SNMP traps are used to trace Issues related to switches using monitoring tools. This article will help with configuration and tracing SNMP traps using captures....
Issue noticed:When a 3m DAC cable connection is made in 7150 between port 1/3/1 to 2/3/3The link remains down, and the two switches will not stack with each other.Details from Ruckus optic guide:Link to Ruckus optic guide for reference:https://www.co...
By using copper Ethernet cabling to provide DC power, Power over Ethernet (PoE) removes the requirement for distinct power supplies and sockets. It grants increased installation flexibility for Ethernet end devices, although it lacks Ethernet data ca...
Issue: Unit 3 status is showing as reserve state under the show stack output below:ICX7750-26Q Router# show stackT=1d17h49m48.5: alone: standalone, dynamic cfg, S: staticID Type Role Mac Address Pri ...
:: IP ADDRESS ASSIGNMENT IN 8200 DEVICES::In 8200, The Switching image was deprecated with 10.0 and each platform will only use one image starting with 10.0.ALL the L3 image support L2 features starting w...
Devices running different FastIron releases may encounter SSH connection issues due to differences in default key exchange and host key algorithms. For devices running FastIron release 09.0.10a to 09.0.10h, attempting to establish an SSH connection w...
Before proceeding with the following steps, please note that the example resets the username to "super" and the password to "sp-admin," which is the default for FastIron 09.0.00. Ensure to press Ctrl and Y before executing the steps below: You must a...
