RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

Off the wall - How to control STATUS LED in general purpose Linux?

I don't expect much of a reply on this (unless someone at Ruckus is feeling really generous) but I recently got my hands on a SmartZone 100 controller that's EOL'd and out of support and to add insult to injury, it also has a failing hard drive. It ...

Steps/Experience for Migrating from SZ-100 to SZ-144 Cluster

Hey Everybody, thought this may be the best place to reach out and ask for some guidance.We have around 250 ruckus APs, which includes R720's and H550's, all running on their own VLAN with a Smartzone-100 controller.We recently acquired two new SZ-14...

Resolved! Slow downlink for the R650 registered in vSZ

Hello everyone.We are always very grateful for your support.Regarding the issue we've encountered this time, I searched the forum and found another similar topic: https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Fixes-in-Janua...

Resolved! R550 connects to SZ but does not upgrade firmware

Hi thereI'm trying to setup a brand new AP R550 with SmartZone. The AP finds SZ IP (192.168.216.11) via DNS: ------ SCG Information ------ SCG Service is enabled. AP is managed by SCG. State: RUN_STATE Server List: 192.168.216.11 SSH tunnel connecte...

Smartzone Switch Port Edit Issue "All Member Ports should be of the same Port Speed"

I have just bought 3 new switches to add to my other 16 and there are running version RDR10010d_cd32 x ICX8200-24P1 x ICX8200-48PFThe switches are online fine but when you go to edit any port I get this message"All Member Ports should be of the same ...

CommScope RUCKUS Community Forums

Forum Posts

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

Off the wall - How to control STATUS LED in general purpose Linux?

Steps/Experience for Migrating from SZ-100 to SZ-144 Cluster

Resolved! Slow downlink for the R650 registered in vSZ

Resolved! R550 connects to SZ but does not upgrade firmware

Smartzone Switch Port Edit Issue "All Member Ports should be of the same Port Speed"

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

R550 connects to SZ but does not upgrade firmware

Slow downlink for the R650 registered in vSZ

System Operation

DHCP server on smartzone for wireless clients

SZ124 WLC Newest possible Firmeware Version for th...

I can't try to auth using chap for Test AAA server...

VSZ - Essential 3.6.1.0.227

SmartZone AP Issue

Remote syslog server

MFA Workflow