Hi @javier_leal_lil,Based on your current APs(300) your setup will fall under (1-2 Nodes, 4 Logical processor, 16 GB RAM, 100 GB disk per node.), if you want 1000 APs to be supported in future (1-2 Nodes, 4 Logical processor, 18 GB RAM, 100 GB disk p...
Hi @juan_comunales ,Si sus puntos de acceso son controlados por SZ/vSZ, puede intentar restablecer su punto de acceso con el siguiente comando desde SZ cli.SZCLI#remote ap-cli <ap-mac-address> "set factory"SZCLI#remote ap-cli <ap-mac-address> "reboot...
Hello,Does the AP use frequency 5490 through 5570 if I choose any channel between 100 and 112 at 80MHz bandwidth?And does it use frequency 5580 through 5650 if I choose any channel between 116 and 128?Answer : Yes.Explanation: When channel bonding is...
Hi @javier_leal_lil,You will need to setup NPS on the AD, use below document as a reference for NPS/AD integration for 802.1x based authentication.https://support.ruckuswireless.com/articles/000002109
Hi ,When channelization is set to 80 MHz, selection of channel means the primary channel for operation in 80 MHz band.If you look at the bandwidth of any channel from (100 to 112) using 20 Mhz bandwidth, in that case the centered channel named as 106...
