For ease of management and monitoring of the ICX switches, they are enabled to communicate with Ruckus's cloud platform : Ruckus 1 or R1, as we call it.Here we have the switch onboarded to the cloud under the venue :We see the same under Wired >> Swi...
As a Ruckus Technical Support Engineer, I would like to share my experience on configuring automatic zone firmware upgrade on vSZ.Follow below steps to schedule zone firmware upgrade on vSZ running on 6.1.1.0.xLogin into vSZ GUI>>Administration>>Upgr...
Hey all, I wanted to take a moment to touch on the minimum code level to onboard an ICX switch to RUCKUS Cloud. In order for an ICX to begin the onboarding process to RUCKUS Cloud, they must be running a minimum code level of 8090d. To confirm your ...
In this self-help discussion, I will explain how to determine controller upgrade compatibility, supported APs and other useful information. Follow the below steps: Note down the below details of your current controller setup. Controller type (virtu...
Hey All, Have you ever wondered what code Ruckus recommends you run on your ICX? You are in luck. Each product support page has a built-in recommendation or recommendations. While these recommendations will not cover every scenario or customer, it ...
