RUCKUS Self-Help
Start here to find solutions to common problems!
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

QinQ configuration guide in ICX switches using tag profile

Summary:This Article explains about how to setup QinQ in ICX switches. QinQ setup in used in networks like service provider, ISP’s etc. to help mange the network easily and provide more sublets independent of each other.Question:How to configure QinQ...

Chandini_1-1716918439269.png
Chandini by RUCKUS Team Member
  • 100 Views
  • 1 replies
  • 0 kudos

Things to consider about PoE at a glance, when deploying.

By using copper Ethernet cabling to provide DC power, Power over Ethernet (PoE) removes the requirement for distinct power supplies and sockets. It grants increased installation flexibility for Ethernet end devices, although it lacks Ethernet data ca...

jdryan_0-1712914896074.png
jdryan by RUCKUS Team Member
  • 300 Views
  • 0 replies
  • 1 kudos

Reasons for Stack unit going into Reserve state

Issue: Unit 3 status is showing as reserve state under the show stack output below:ICX7750-26Q Router# show stackT=1d17h49m48.5: alone: standalone, dynamic cfg, S: staticID      Type                   Role             Mac Address            Pri     ...

Smiley by RUCKUS Team Member
  • 143 Views
  • 0 replies
  • 0 kudos

IP Address Assignment in 8200 Devices

                                              :: IP ADDRESS ASSIGNMENT IN 8200 DEVICES::In 8200, The Switching image was deprecated with 10.0 and each platform will only use one image starting with 10.0.ALL the L3 image support L2 features starting w...

Mayank by RUCKUS Team Member
  • 201 Views
  • 0 replies
  • 1 kudos