Configuration for SZ administrator log in using Radius Server (without default role mapping )STEP-1Create the Administrator account in SZ under Administration > Admin & Roles > Administrator > CreateThe username will be the Vendor Attribute value (Ra...
Issue:On the Unleashed app, if we click on Manage Network >> and select Facebook, the authentication fails with the following error message:"Feature Unavailable: Facebook Login is currently unavailable for this app, since we are updating additional d...
Issue:When iOS mobile users tries to login to Unleashed app using the admin credentials, the authentication gets failed with the error "You are not connected to Unleashed Network. Go to Settings"This issue is affected for iOS devices only, Android a...
Here is a quick guide on how to obtain the switch password in the ruckus cloud controller:- Go to the venue where the switch is located -Select configuration-Select switch configuration-Select AAA-Scroll down to local users - click in the eye to see ...
The DHCP option 43 is one of many methods for the RUCKUS AP to discover its controller.This option is configured in the DHCP server and must be masked. Also, the vendor code and the length of the IP address must be specified in HEX.RUCKUS vendor code...
How Standalone APs Learn Controller AddressesIf your APs will be managed by a controller, you will need some way to ensure that the APs can discover the controller on the network. There are several different ways to do this, and the specific controll...
Maximize efficiency by running CLI commands on multiple APs simultaneously. RUCKUS ZD's 'remote_ap_cli' command in debug mode empowers you to take command effortlessly:1. Access debug mode:ruckus> enaruckus# debugYou have all rights in this mode.ruck...
Issue observed: APs with more than one ethernet port where the second port is capable of providing higher speeds (above 1000 Mbps) is unable to negotiate over 1000 Mbps speed with its uplink switch.Prerequisite: Switch should also be capable of provi...
Recently we have found that one of our customer is facing issue with publishing the workflow which was working fine earlier, below we will discuss about the troubleshooting steps involved to rectify the issue.Issue: Unable to publish the workflow. ...
