The problem noticed is that the user will notice error message “no matching key exchange method found” when we to do an outbound SSH connection from other switch models in version 8095:Issue noticed:Sep 29 14:45:09:I:sshd: Unable to negotiate with 10...
We notice false alerts with temperature on 8200-48ZP2 and 8200-48PF switch series in sensor 5 going above 200 degreesIssue noticed:SSH@ICX8200-48ZP2 Router#show chassisThe stack unit 1 chassis info:Power supply 1 (AC - PoE) present, status ok M...
Issue noticed:Device(config)#chassis name Chassis name poll-time Change hardware sensors polling interval seconds trap-log Change fan or power supply loggingOptions are not available to enable Fanless mode on 8200 switches.Solution: Fa...
The power management on the ICX switches until version 9010 have Static Power Management only where we have inline power enabled on the interface by default.Dynamic Power management helps with dynamic power allocation on the ports based on power cons...
Error encountered below:
Reason for getting the above error:
The TI PoE chipset is different for the newly released/manufactured switches with 7150-48ZP Model.These PoE chipset work from version 8095k and above in 8095 major release and 9010h and a...
Hi MadhugautThank you for reaching us Apologies, effective November’2022, ‘Ruckus Support for Lennar Homes customers will no longer be handled by phone or email or remotes session. We will be exclusively supporting customers via this community forum ...
Hi Kevin Thanks for reaching usFrom the details shared looks like there is data traffic going through the port. This issue may take time to understand the cause and may need details to be shared. Have you tried using debugs on the switch which is men...
Hi PmonardoThank you for reaching us. Could you please let us know the firmware version that is currently running in the 8200 switches series ? Could you please help us with which 8.0 version was used to compare the radius results with ?Also please f...
Hi Jeremy813Adding to the post. Below is the link using which you can access the switch using console. Link to access the switch using console:https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-7150-12CP...
