Many of SZ customer request for option to move AP from of a particular region/Zone to a specific node, currently this configuration is only possible with SZ-300 hardware where we can setup node affinity to point APs from a zone to a specific node.In ...
Are you having trouble to onboard an ICX switch into your SmartZone controller? Check the logs in the ICX switch with the command 'show log', if you see errors like these below, it's very likely there's a certificate issue between the ICX and the con...
SSH Protocol has been upgraded in 09.0.10d release to resolve the SSH vulnerabilities detected by NESSUS tool. SSH service disconnection in expected with SSH client that uses SSH-RSA host key only. SymptomsSSH service disconnection. Older SSH clients...
Recently had come across a concern where the given printer was not able to stay authenticated on the mac-auth session it had initiated. Digging further into what was causing, it found it to be as the same was classified headless device.A tiny descrip...
Type: 100BASE-FX is the technical name of Fast Ethernet over fiber optic cablesUsage:Fast Iron ICX devices support the following types of SFPs for 100BaseFX:Multimode SFP—maximum distance is 2 kilometersLong Reach (LR)—maximum distance is 40 kilomete...
Type: 100BASE-FX is the technical name of Fast Ethernet over fiber optic cablesUsage:Fast Iron ICX devices support the following types of SFPs for 100BaseFX:Multimode SFP—maximum distance is 2 kilometersLong Reach (LR)—maximum distance is 40 kilomete...
iPads are more likely to show up with device type as “MacOS Catalina” than iPhones.This is not a misinterpretation on Cloudpath.Cloudpath uses the information provided from the iPad to determine the device type. The iPad sends it’s user agent informa...
The AP CLI script feature on the Smartzone platform, has a limitation of timing out within 45 minutes of application on a zone. The symptom of the problem is as seen as below:Generally such steps as i) breaking apart the zone to create multiple zones...
Configure Radius parameters in the switch :Configure PFsense NAS informationGo to Services -> Free Radius -> NAS/Clients -> +Add ( enter Switch Ip address, radius secret key, Switch hostname)Configure User informationGo to User tab -> Add
