By using copper Ethernet cabling to provide DC power, Power over Ethernet (PoE) removes the requirement for distinct power supplies and sockets. It grants increased installation flexibility for Ethernet end devices, although it lacks Ethernet data ca...
For ease of management and monitoring of the ICX switches, they are enabled to communicate with Ruckus's cloud platform : Ruckus 1 or R1, as we call it.Here we have the switch onboarded to the cloud under the venue :We see the same under Wired >> Swi...
QoS: Quality of Service, as the name implies, stands to improve the service of traffic in the network.More specifically: traffic that otherwise would be suppressed due to huge amounts of frames flowing through.This would generally be seen for VoIP tr...
In a network, latency can occur at any moment. However, given that we have a varied end-user pool, the impact of this can vary in scale. Therefore, keeping a close eye on it would prove vital.Given that in a deployment, we see various devices from va...
Network connection Issues can be few of the things that can be a bit tricky to troubleshoot, Main reason being that there is always not one same cause behind the scenes that caused it, scenario to scenario the cause for the trouble can vary. Genera...
Hi frnkblk,
With respect to the query, please do check once with "show who" command, that should list all ssh/telnet/console sessions to the unit.
Let us know if the same helps !
Regards, Joshua
Hi Jeronimo,
The FI not being listed in the Release notes I would need to check on the same on what it would imply. However based on the details that were looked into, it should be tended-to on the newer/recent revisions.
Regards, Joshua
Hi jmora,
Apologies for the delay in reverting,If the switch is running on 08095k, then from here update to 9010 should be possible.As it would be a single step update from there.However as the code version gets changed, the update may take longer cl...
Hi Applewaffle,
For Creating a trunk port, where multiple vlans are tagged and there is a untagged vlan.
The ports are untagged to the default vlan thats set on the device by default. Usually this is Vlan 1. When configuring the switch, the port woul...
Hi Jeronimo,
Checking on the mentioned FI-270020, the same has been tended-to on the newer or the current releases. Tracing the same, patch for this concern should be addressed on over an previous release of 9010 code image. Hence on the current rele...
