Introduction:In this Knowledge Base (KB), we will demonstrate a quick and efficient method to retrieve all the BSSIDs (Basic Service Set Identifiers) for the WLANs in all the Access Points (APs) within the v/SZ controller. Instead of relying on CLI s...
APIs provide a powerful method to configure and retrieve information from the SmartZone controller. To perform any API task, we need to include a service ticket in our requests. This service ticket grants us access to the controller's functionalities...
This is an example how to configure breakout ports on ICX7850, which is similar to other ICX models, however it might change the ports available per each ICX Model (7750,7550) Breakout mode is when a high-speed interface, for example 40 or 100g port...
Introduction:When adding a new Virtual SmartZone (vSZ) node to an existing cluster in an Amazon Web Services (AWS) environment, it's important to consider the cloud region of the new node. This article provides guidance on how to handle situations wh...
FTP is generally faster than TFTP. FTP uses TCP (Transmission Control Protocol) for data transmission, which provides error checking and correction, ensuring that the entire file is correctly received. This makes FTP more reliable and faster for tran...
This event may appear on the events log of the AP. AP WLAN oversubscribedAP [AP-name@M:AC:AD:DR:ES:00] does not have enough capacity to deploy all WLANs. Only maximum WLAN number of the AP can be deployed.These logs may be seen on the AP CLI:Jul 13 2...
This a demo for essential configuration steps to authenticate wireless clients using 802.1x- Unleashed by configuring NPs policy on a Windows server. 1- Make sure the server has the necessary basic features installed. 2-Navigate to the Network ...
This is a simple example how to configure SNMP version 3 with an ICX switch, please consider SNMP version 3 is more complex than versions 1 and 2, therefore, it might require additional configurations that we are not including in this articleICX conf...
Ruckus Cloud Configuration for the wlan: In Active Directory:Create a user-group,Create a user and add this user to the above user-groupThe password used here will be mac-address of the client device. Password used here is 00c0caac2ef6Right Click on...
