Connecting an ICX to the Ruckus controller vSZ or cloud Pre-requisites In this document will be found the best practice and support documentation to add a new ICX to the controller for the first time. 1: Your running version must be UFI, can be che...
Hello All, This is an important security announcement for Cloudpath.What is the issue?A vulnerability in the web-based interface of the RUCKUS Cloudpath product could allow a remote, unauthenticated attacker to execute persistent XSS and CSRF attacks...
On Unleased AP, when we try to create the Guest SSID with Facebook login option, we get the below error when we click on "Register""Register guest service [Facebook] to Facebook failed.Root Cause:This is due to Facebook has officially announced the ...
This article explains setting up a Cloudpath Enrollment System SCEP certificate generation with Intune for Android devices, there is a document which covers all the Intune related integration except Android, which is a concern of a lot of our custome...
Testing Topology1. ICX switch connected to the SZ.Debugs and FITRACESExecute the below commands to clear the existing counters before enabling debug/fitrace.• clear ip revssh counters authentication• clear ip revssh counters channel all• clear ip rev...
Ruckus One uses JSON Web Tokens (JWT) to secure all endpoints.POST method is used to obtain a jwt.The API response to POST call includes tenantId and token.Token is valid for 60 minutes.POSTMAN:Postman is the tool used in this example to make an API...
Issue noticed:Device(config)#chassis name Chassis name poll-time Change hardware sensors polling interval seconds trap-log Change fan or power supply loggingOptions are not available to enable Fanless mode on 8200 switches.Solution: Fa...
The power management on the ICX switches until version 9010 have Static Power Management only where we have inline power enabled on the interface by default.Dynamic Power management helps with dynamic power allocation on the ports based on power cons...
In some situations, administrators may wish to disable the LED lights on the access points to avoid drawing attention to them, when installed in a public location, for example.To disable status LEDs on all APs of a specific model:Go to Access Points ...
