This article will help you with logging into the switch through CLI using password through SSH/console when you are not able access the switch using the current password and switch is up in cloud R1Step 1: Click on “Venue “ Click on the Venue your sw...
If your firmware of the switch is in older versions before 8080 then you need to follow the below path. Here we are taking example of 7150 switch and are trying to upgrade from 8060 version to 8095g. Path to follow: 8060 -> 8080f non UFI -> 8095g UFI...
Check this KB for "Upload image failed. Reason: Unsupported version."Check this KB for "The system cannot be upgraded, because the following zone(es) will be unsupported."Check this KB for "Can I have my old APs in the newest controller version 6.1.1...
Analyzing a packet capture is one of the best tools when troubleshooting the majority of the issues in wireless communications, hence, collecting a packet capture is also a task that we should be familiarized with.v/SZ - Collecting AP Packet Capture ...
When using SmartZone as our wireless controller, we might be tempted to configure an 802.1X WLAN to directly authenticate against an Active Directory server, however, this configuration is not supported.If a WLAN using 802.1X authentication is requir...
Ruckus Cloud has now started to use JSON Web Tokens (JWT) to secure all endpoints. Previously Ruckus Cloud used a cookie with an API key for authentication in evey API call.•POST /token is used to obtain a jwt.•The response includes the tenantId and ...
When troubleshooting performance issues in a wireless network, taking care of the different frame flows over the air, will help us mitigate the majority of the issues.One of the frame's flows that affect the overall performance of the wireless networ...
It's been reported that in some HP or Aruba PoE switches, continuous logs will be printed on the switch's console saying: "PD stopped responding to LLDP PoE TLVs from PSE. Previous LLDP negotiated power values will be retained" when certain models of...
The latest and most recommended version of the virtual/SmartZone controller that supports the AP R700 is 5.1.2.0.302.https://support.ruckuswireless.com/softwareThe advantage of the SZ controller is that if you need to upgrade to the newest version 6....
