CommScope RUCKUS Community Forums

Dilshad_Zafar · 06-16-2023

Default mapping explained with example for Admin logon using AAA in vSZQuestion- When should I use default mapping with SZ admin login using RADIUS and how does it work.As we know that RADIUS Vendor-specific attribute "Ruckus-WSG-User" is used to map...

Dilshad_Zafar · 11-02-2023

Hi @pgonzalez9 ,Could you please confirm the models of these APs.In such case, I would start my troubleshooting from checking if the APs are still getting sufficient power and whether they are going through random reboots when clients face issue as t...

Dilshad_Zafar · 10-30-2023

Hi,Thanks for your query.R700 and ZF7372 supports AP firmware upto 3.6.2 release. With 6.1.1.0.959, you can upload an AP patch for 3.6.2 firmware which will allow you to create a separate zone running 3.6.2 release for these two AP models.Here is the...

Dilshad_Zafar · 10-30-2023

Hi,In order to onboard the AP to vSZ, you need to have a way to get the AP discover the vSZ. Most common ways of SmartZone discovery are :-1. Using DHCP option 432. DNS record3. Manually setting SmartZone IP on the AP CLI using "set scg ip < SZ IP >...

Dilshad_Zafar · 09-25-2023

Hi @gmichal , FD means Factory Default or Factory resetting the AP. You can follow this KB on how to do factory-reset - https://support.ruckuswireless.com/articles/000012418 . Note that this will delete all the configurations on the AP.

Dilshad_Zafar · 09-18-2023

Hi Jordan,Is the AP standalone or managed by any controller like ZD or SZ/vSZ?From AP CLI, you cannot delete a firmware completely, instead you can change (upgrade/downgrade) the firmware using upgrade process. The upgrade process from AP CLI is prov...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Default mapping explained with example for Admin logon using AAA in vSZ

Re: ruckus connectivity issues

Re: Firmware Zone for ZF7372 in VSZ 6.1.1.0.959

Re: R320 question

Re: R510 AP Drops Every 5 Minutes

Re: DELETING FIRMWARE FROM RUCKUS CLI