Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....
Hello,I'm using the 3 interfaces model for vSZ. Since the Cluster interface is only for clustering, does it need a default gateway? I want to avoid creating a vlan interface and have this vlan routed through our network.
Hello, I am trying to add a new vSZ node to an existing cluster but I keep getting an error"Cluster name "Existing Cluster Name" does not exist"I've check the IPs and test hosts on the Cluster vlan can talk to each other.
I recently deployed a vSZ controller appliance at work. I also have deployed thirteen R650 access points. This system replaced a Zone Director physical appliance and five R500 access points. The old system worked fine without issue. Users were...
In the ssid I chose "none" to remove the password, but the ssid still has the password help me please
We have our 802.1x RADIUS Server configured to use an NPS Server.When we test the RADIUS Server from the Smart Zone Controller or via an 802.11x enabled SSID it fails.In the logs on the NPS Server we see Error Code: 66 Reason Code: The user attempted...
