Is there a way to dig deeper into Connection Failures to see what exactly is happening and correlate that information on the root cause. Just showing me "Connection Failures" and nothing else is so pointless. vSZ or SCI neither have a way to drill ...
I have a vSZ-H and a physical data plane appliance with a tunneled SSID configured. SSID works fine however, trying to do WebAuth so it gives a certificate error. Installed the 3rd party valid SSL cert (wild card) and still getting an error in the ...
Is there a way to limit number of devices for group DPSK? Let's see I have 10 Group DPSK's and I want only 2 devices allowed per group DPSK or 4 devices per DPSK. I don't see any option in the vSZ-H to set that limit.
I got a little confusion about “Web Auth” and 3rd party valid SSL cert. I know under Certificate to Service Mapping I will map AP Portal to the cert that will get imported under “SZ as a Server Certificate”. But if the SSID is not doing the Proxy vi...
Following quick set up talks about the SZ 144-D config but does not explain how the NIC's need to connect?https://ruckus-support.s3.amazonaws.com/private/documents/3409/SZ144-D-QuickSetupGuide-800-72550-001...Just mentions to connect Port 1 or 2 to t...
Thanks I found it, someone in Slack actually knew the answer. I forgot to update it here. Still blocked client's shouldn't be flagging the AP's though. It makes the customer(s) think something is wrong when in reality there isn't anything wrong.
So I understand what you are saying now. If the cert is imported wrong shouldn't it also not work when accessing the GUI of the vSZ? When doing so, correct cert shows up.
Are you talking about under the SSID and Authentication Service instead of RADIUS using AD Authentication and turning on TLS?
When the user connects to the portal they don't even get the new cert, they still get the Ruckus cert.
WLAN SSID is setup to use WebAuth with AD Auth. I think I'm going to just create a ticket because apparently there is no good Ruckus documentation as usual on how to accomplish all this.
Can you confirm what did you mean by the IP in the common name? Did you mean when generating the csr I use the IP of the vSZ?
Also since there is a physical data plane appliance involved and there are two vSZ nodes do I have to use the same cert fo...
