RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
SmartZone (SZ) controllers support legacy Zone firmware versions.Example: A SmartZone running 5.2.2 can manage Zones running:SZ 3.6.2 (GD)SZ 5.1 / 5.1.1 / 5.1.2SZ 5.2 / 5.2.1 / 5.2.2 N-2 Rule: Ruckus follows an "N-2" support model for GD (General De...
The logical interfaces of the Smart Zone are Management, Control, Cluster, and Data. Each can have its own IP address and MAC address. Management: Used to access the Web Interface of the controllerCan be used to SSH into the controller using admin cr...
InformaCast is an emergency mass notification system that sends critical messages to on-premises devices and mobile users, helping keep people safe — by providing notification solutions for every need. This system does not work on Ruckus WLAN's nativ...
Summary:In this article, we will look into the steps involved in setting up Self Registration Guest Pass Generation in Smart Zone controller running in 6.1 versionNote: This feature is available since 6.1 version onwards Network Environment: SmartZ...
Summary:In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google.Network Environment: SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.0.x.R350 (Access Poin...
