We want to change the description of the Nodes in our cluster. Not the the clustername or name of the node, just the desciption field of the node. Somehow i can't find it where to change it.
We just experienced a random reboot with an AP at a client. Its an T310c AP. So far it only happend once. The error in the log is
ipq40xx-pinctrl 1000000.pinctrl: could not request pin 44 (GPIO_44) from group gpio44 on device 1000000.pinc...
We have a vSZ running with 3 interfaces behind a router.
Now we want to add a 2nd node to this cluster, also with 3 interfaces. This 2nd node is at a remote site and also behind a router. What ports should we forward in order to have te clus...
Hello,We have a client with 10 Unleashed AP's. 8 AP's are connected and 2 disconnected but this is because they are not physically connected to the network, so that is to be expected. Currently, we are not experiencing any major issues, everything se...
Problem solved. Apparently the newest firmware (fw 4.7) on the switch (Zyxel GS1920-10HP) was not stable and caused the problem. After flashing the switch with a previous version (4.6), all was stable again.
the device is fixed to the wall and nobody hit the reset button. Also the reboot happens every 20-30 minutes for a period of time and then suddenly it stays up for 4 hours then it starts rebooting randomly again every 20 or so minutes.