Currently our R760 are running in low power mode (30w max power from Cisco 9200). We are aware of the low power mode "restrictions/limitations". However, we wanted to know if we did decide to add POE injectors to some of the APs, will there be is...
Been struggling with couple of issues with our R760 APs. We paid extra for the Ruckus Ai and this platform has been showing sporadic incidents in involving POE and Physical Link speed mismatch on just some of the APs.We are running 7.1.1.0.872 on th...
I am not a certificate guru by any means. We do a hand full of updates every year and every system has a different interface/process to import. The SmartZone Cert import seems to give me the most problems.All our certificates are generated from Go...
I have read the following: RUCKUS Forums - How to upload certificate on SmartZone Controllers - CommScope RUCKUS Community ForumsandRUCKUS Forums - How to Install a Certificate on SZ/vSZ? - CommScope RUCKUS Community ForumsAnd still, I have to call s...
Can anybody tell me how or why we are unable to get r760 APs to pull the correct power from a CISCO 9200 switch interface?We have enabled "power 2-event" on the interface which will provide class 4 on power on the interface. Is the R760 considered t...
Not sure about that....the 2960x and 9200 series Cisco switches I was working on, the LLDP was "not enabled".Show LLDP% LLDP is not enabled,,,,,, Maybe I am doing something wrong but this what I am experiencing.....
Thanks for the reply. I suspected as much. I figured out my issue.......had to not only get LLDP running (LDDP RUN) on the switch but to also configure it on the actual interface that the AP plugs into (LLDP RECEIVE and LDDP TRANSMIT)......
Thanks for the replies.I ended up rebooting the NPS server first (since updates were pending) but this did not correct the problem. However, I did see in the NPS log files that PEAP protocol was now being used by the clients. I found this to be ver...
