RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

ICX7150 does not get config of SZ

Hi guys,in the vSZ 6.1.0.0.935 I have a Switch group and configured some VLANs and AAA settings for ICX7150 switches when I join new switches from the staging group they don´t get the configuration from the SG. When I alter the config of the SG only ...

Enabling 802.11r disables PMK caching and OKC?

In Ruckus Best Practice (https://support.ruckuswireless.com/documents/2339-smartzone-voice-over-ip-voip-best-practices-design-guide ) I have found info that "Enabling 802.11r will disable PMK caching and OKC on that SSID."Seems very strange. Is it so...

Resolved! Is ZF7982 supported on 5.2.2 vSZ?

Hi!I am going to upgrade my vSZ since 3.4.2 at 3.6.2. After it, I will program another upgrade until 5.2.2 because I have to manage some R550 and I can´t manage them with version 3.6.2. Will have any problem with some APs/AP Zone with ZF7982?Thanks!

Virtual Smart Zone Radius Protocol cann't by PAP

My Virtual Smart Zone is 6.0.0.0.1331 ，then I use Proxy(SZ Authenticator)，Create Radius ，Test AAA by PAP is Good。But when I actually connect back to Radius through the AP, it failsError log display "chap: ERROR: &control:Cleartext-Password is requ...

Controllers cluster

We have 2 controllers added in one cluster and it was working fine, client requested to change both IPs of the two controllers, after changing the IPs, both controllers are up & both are pingable but each controller is not seeing the other controller...

CommScope RUCKUS Community Forums

Forum Posts

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

ICX7150 does not get config of SZ

Enabling 802.11r disables PMK caching and OKC?

Resolved! Is ZF7982 supported on 5.2.2 vSZ?

Virtual Smart Zone Radius Protocol cann't by PAP

Controllers cluster

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

I'm Forgot admin Password for my SZ100

R550 connects to SZ but does not upgrade firmware

Slow downlink for the R650 registered in vSZ

System Operation

DHCP server on smartzone for wireless clients

SZ124 WLC Newest possible Firmeware Version for th...

I can't try to auth using chap for Test AAA server...

VSZ - Essential 3.6.1.0.227

SmartZone AP Issue

Remote syslog server