CommScope RUCKUS Community Forums

mark_pledl · 07-07-2022

Dear Ruckus Crowd,please be careful when you try to upgrade from 5.2.2.0.1562 aka MR2 release to 6.1.0.0.935. it might break your cluster and you will have a bad day if you do not have a exported cluster backup or snapshot.Reproduced with vSZ-E. Test...

mark_pledl · 03-17-2023

Dear Christoph,the zone it self needs to be created with 3.6.2 already, if you started with the Zone and firmware 5.1.2 you cannot go back. So try to create a new zone with 3.6.2 and do all settings and move the AP.Br,Mark.

mark_pledl · 03-17-2023

Dear Abhijit, please also habe a look at that "Access & Core separtion" button. By default that is off so all interface use one default gw. if it is enabled each interface has and uses its own default gateway. It could make things easier for you if y...

mark_pledl · 03-14-2023

Dear Squozen,yes of course you can use it. But if I need to disable second lan port, usb and iot, you lose most of extras on that AP. If you need one of these extras you need PoH or uPoE compatible switches or you lose a lot capacity in 5GHz antenna ...

mark_pledl · 03-14-2023

Maybe completly outdated. The R850 does not support 802.11bt only PoEH or UPoE. That is like you have dicovered a big issue with Aruba Switches. Only switches are working with it are are Commscope/Ruckus ICX7150-48ZP, ICX7550-24ZP or 48ZP or cisco on...

mark_pledl · 03-11-2023

Dear Alex, I do not use Ruckus cloud. Which AP firmware is there in use and which AP do you use?Thanks in advance.Br,Mark.

CommScope RUCKUS Community Forums

User Statistics

User Activity

Warning - upgrade from 5.2.2.0.1562 to 6.1.0.0.935 breaks cluster

Re: vSZ Unsupported APs Upload Old Firmware for Zone

Re: Virtual Smart Zone High scale - physical interface for public ip

Re: Ruckus POE compatibility

Re: Ruckus POE compatibility

Re: Poor WiFi connection in Intel AX210,AX211