Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....
The logical interfaces of the Smart Zone are Management, Control, Cluster, and Data. Each can have its own IP address and MAC address. Management: Used to access the Web Interface of the controllerCan be used to SSH into the controller using admin cr...
InformaCast is an emergency mass notification system that sends critical messages to on-premises devices and mobile users, helping keep people safe — by providing notification solutions for every need. This system does not work on Ruckus WLAN's nativ...
Hi Guys,I have implemented WLC SZ144 connected to core switch 9500 by connecting using fiber patch cord. I used Cisco module model GLC-LH-SMD on both side cisco and WLC, but I don't see any port up on both devices. anyone have experience, please hel...
Hi.I tried to auth using chap method for Test aaa server on SZ.But SZ used only pap mothod for Test aaa server. Doesn't this test mothod apply yet on SZ?Regards.
Hi, We had one zone in which there was only 1 SSID.Afterwards, we created another exact same zone except the authentication part different. Now all the AP's are throwing two SSID's with the same name. The only difference b/w the two SSID is the numbe...
