SmartZone and Virtual SmartZone - Page 50 - Commscope

SmartZone and Virtual SmartZone

Forum Posts

Sorted by:

ASK the Pack

New vSZ node can't join Existing Cluster

Hello, I am trying to add a new vSZ node to an existing cluster but I keep getting an error"Cluster name "Existing Cluster Name" does not exist"I've check the IPs and test hosts on the Cluster vlan can talk to each other.

vSZ issues after deployment - Wireless Latency

I recently deployed a vSZ controller appliance at work. I also have deployed thirteen R650 access points. This system replaced a Zone Director physical appliance and five R500 access points. The old system worked fine without issue. Users were...

In the ssid I chose "none" to remove the password, but the ssid still has the password help me please

In the ssid I chose "none" to remove the password, but the ssid still has the password help me please

802.1X Virtual Smart Zone using NPS with Error Code:66

We have our 802.1x RADIUS Server configured to use an NPS Server.When we test the RADIUS Server from the Smart Zone Controller or via an 802.11x enabled SSID it fails.In the logs on the NPS Server we see Error Code: 66 Reason Code: The user attempted...

LDAP Auth for SSID Virtual Smart Zone

Is it possible to setup LDAP Authentication on a Wireless SSID? If so How?We have an LDAP AAA Server setup which is used by our Web Authentication Portal but when setting up another SSID using 802.1x we are unable to choose the LDAP Authentication Se...

Top Kudoed Authors

User

Count

3

2

2

2

1