Hello RUCKUS Lennar Community, Greetings of the day!!! We have recently introduced the RUCKUS Lennar Knowledge Base self-help guides portal section within this Community for Lennar Home users. It includes the most common issues and some technical gui...
Hello RUCKUS Community Team, Greetings of the day!!! This post is with regards to the announcement details we posted on this Community forum (on 06-22-2023) regarding the iPhone with iOS 16 version login issue unable to reach “unleashed.ruckuswireles...
Welcome to your primary source for RUCKUS Lennar SmartHome Support! Before posting please review these suggestions. Please be sure to read the RUCKUS Community GuidelinesPlease be considerate and respectful. We understand you may be frustrated, but p...
How to Upgrade a Switch ICX-7150-C12P via TFTP In the following example, we are going to upgrade a switch from a non-UFI version to 8095h UFI version. You can use the next guide as reference Software Mandatory Upgrade Steps from a Pre-08.0.90 No...
This is a reference on how to connect devices in the most common Lennar setups There must be a modem and a router to connect the ICX 7150-C12p, it must be plugged into one of the twelve ports (the middle ones). Note: It can be a 'modem' and 'router'...
Step 1 View your available networks and Connect to "Configure. Me"(Where you see 1807D0, these are final 6 digits of your AP’s MAC address - This will be unique)When the device is connected to configure.me it takes a bit of time before the device to ...
Please read carefully all the instructions before proceeding. 1 ) If you have more than one Access Point (AP) in your house, please go to the Ruckus Switch (located in the panel) and disconnect from its ports the Ethernet cables of all the Access Poi...
1 ) Please go to: unleashed.ruckuswireless.com or use the IP address of the Master Access Point How to find my Ruckus “Devices IP address” using free applications https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-access-t...
