CommScope RUCKUS Community Forums

rosewood72 · 03-25-2025

I upgraded my R510 to R710. I have a POE switch that max out about 30W per port 120W total. That being said My R710 is in a degraded state stating that more power is needed. I connected to my ICX switch and see that the switch allocated 28850 mW and ...

rosewood72 · 03-23-2025

I want to know if both AP's can co-exist in the same unleashed network without any issues?

rosewood72 · 03-23-2025

I recently upgraded from R510 to R710 APs. Now, I'm experiencing some slowness. I used to be downloading over 300Mbps but now I'm lucky if I get 295Mbps. Looking at SpeedFlex, AP to AP is also slower on the 710 than 510. 50 to 100 Mbps is a considera...

rosewood72 · 03-20-2025

What are LTE Access Point for CBRS? Will this help me boost my LTE signal while indoors?

rosewood72 · 04-24-2024

I have reset the AP multiple times. However, I get the same result. The AP is connected to ICX7150. The port always shows down but the AP is receiving power. I need to know what I'm doing wrong and how to resolve this issue thanks. AP is running code...

rosewood72 · 03-26-2025

no thank you. The other thread answered my questions related to this.

rosewood72 · 03-26-2025

If I downgrade to 802.3af wont that disable 1Gb ethernet? But I guess I won't really need that. Thank you. Are there any disadvantage to using 802.3af instead of the 802.3at?

rosewood72 · 03-23-2025

Are you trying to log into the switch or the AP? Not sure about the switch but for the AP, you can reset it back to factory by pressing the reset button. Before you do that, you can use the default username and password, super and ap-admin. I hope th...

rosewood72 · 03-23-2025

question: I'm having issues with speed. I have a combination 05 510 and 710 with the 710 as the master. Are you saying that both can coexist in the same unleashed network with no issues? Thanks

rosewood72 · 03-23-2025

If you have an Ruckus ICX switch, it will provide the power but will max out two 2 710s. I have 3 so i used another POE switch but it's not as good as the Ruckus switch so my other 710 is under powered

CommScope RUCKUS Community Forums

User Statistics

User Activity

Ruckus R710 POE requirements

R510 and R710 running unleashed software

SpeeFlex: slow performance after R710 upgrade

What are LTE Access Point for CBRS

AP R510

Re: SpeeFlex: slow performance after R710 upgrade

Re: Ruckus R710 POE requirements

Re: 5G signal on orange, AIR signal off

Re: R710 / R510 5Ghz speed not as fast as I hoped for

Re: Upgrade R510 APs to a newer AP