Hello i have a ZD3000 that is behind a NAT with a public ip and the AP's are in different LAN and gateways.. till here everything fine all works, but when i try to use the option of spectrum analyse i don't get data.. it says is monitoring but i don'...
Hi, I would like to know if it is possible to use 4 R310 APs (in different rooms) to create 1 SSID for office employees to access the entire network and 1 SSID for guests for Internet access only. Do I need an additional ZoneDirector for this? Whe...
Hi,I want to enable DHCP server on an R310 AP, the AP has a static IP address of 10.20.1.5, subnet 255.255.0.0. I know I need to enable a local subnet to enable DHCP, but am not sure what to use as 'local IP address' & 'Subnet mask' on the subnet ent...
I've just done my first firmware upgrade on our SR ZD3000's with Secure AP Image Upgrade enabled and after over an hour less than a third of the ~200 AP's had upgraded. All the rest were reporting upgrade failures and retrying. After that I turned Se...
Is there a way to check which access point a client is connected to on the client? I guess meraki has a intercept page (my.meraki.com) like the home netgear products do (mynetgear.com). I know I can check the controller or AP for connected clients, b...
