RUCKUS Indoor and Outdoor Access Points (APs)

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

7982: Linksys Wireless Bridge Can't Connect

I've been fiddling with a 7982 in my home network and can't get this to work. Hoping for some advice: I have an older Linksys B/G router flashed with DD-WRT. I have it running in what it calls "Client Bridge" mode, basically forming a wireless bridg...

How to reset factory default 2211-EXT repeater mode with hard reset button?

Hi, I've configured a ruckus 2211-EXT as a repeater and now I cannot connect via default IP address either resetting to factory default with hard reset button. Is it possible to reset it? Regards.

Problems ZoneFlex 7341

Hello, I have in my network 5 ZoneFlex 7341 access points and a controller 1106. One of the access points is tipping my switches and leaving my slow network. When I shot this access point everything back to normal. I already gave a reset and the pro...

Can 7731 use declared Indoor channels?

We have a customer that would need to use channels 36, 40, 44 or 48 for a PtP link. Can a 7731 be configured to use those channels. the only way I see how is by setting the Country code to Russia, but can it be done via CLI for other CCs also?

zone flex 2942 keep hanging

After upgrade AP to latest firmware, AP not stable. After an hour, it will hang and uncontactable (ping test failed). Have to reboot again to resume wireless connection.

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1