cancel
Showing results for 
Search instead for 
Did you mean: 

my spectrum analisys doesnt work

nuno_pimentel
Contributor
Hello i have a ZD3000 that is behind a NAT with a public ip and the AP's are in different LAN and gateways.. till here everything fine all works, but when i try to use the option of spectrum analyse i don't get data.. it says is monitoring but i don't get any data with all the AP's that are capable of this analysis.. could be a specific network port that is use to send this info? Anybody knows why? thanks .
Image_ images_messages_5f91c3e5135b77e2478d212c_1e6f34b8c49ed9c8fdb0ba3c313d954e_RackMultipart201702031286891bz-49801a12-c68f-4e98-9e7e-125ff99e91d6-307904374.jpg1486122689



Image_ images_messages_5f91c3e5135b77e2478d212c_c0846d51078004e37e8cd78fb637f9db_RackMultipart2017020310354915f-465f39eb-cb70-464f-8863-3e98aa78eb29-1131820827.jpg1486122616
6 REPLIES 6

dtsblake_588878
Contributor II
Try an alternative browser.  I am using FireFox 51.  ZD 3000 running 9.13.3.0 build 22

Does your browser block pop ups ?

Hello i try already in different computers with IE, Firefox or Chrome. I don't have the block pop ups as u can see i take the screenshot just i don't the se spectrum results. 

Not sure if R700 supports Spectrum Analysis on ZD 9.13, checking.

i have different models that in theory work the spectrum analysis, but all have this symptom . So i think that it must be something that is filtered in the NAT but i don't know what is.