CommScope RUCKUS Community Forums

paul_4gzwo1u6ep · 07-20-2023

I have an unleashed member AP running 200.7.10.202.127 firmware and I want to make it standalone. I performed a reset using the reset button and now I can access it using 192.168.0.1 but the usual super/sp-admin won't let me in, what am I missing ?

paul_4gzwo1u6ep · 07-20-2023

I have a mix of R310, R320 and H510 and according to this page I can have up to 50 APs unleashed for 200.7.using wave 1 & 2. I have 200.7.10.202.127 installed on 26 APs but my limit appears to be 25. The master is an R320. and is not in gateway modeh...

paul_4gzwo1u6ep · 02-01-2017

Hi,I want to enable DHCP server on an R310 AP, the AP has a static IP address of 10.20.1.5, subnet 255.255.0.0. I know I need to enable a local subnet to enable DHCP, but am not sure what to use as 'local IP address' & 'Subnet mask' on the subnet ent...

paul_4gzwo1u6ep · 07-20-2023

sanjay,that's weird, I tried your advice and it worked. I tried the same process on another AP and it didn't work. I cleared the chrome browser cache and then it worked. I find that sometimes I cannot access the unleashed master unless I also clear t...

paul_4gzwo1u6ep · 02-02-2017

The router is 10.20.0.1, I have a mixture of ruckus/proxim APs, the APs have static IPs in the range 10.20.1.xxx and each AP needs to have a DHCP server with a pool of 100 IPs, so this AP has a static IP of 10.20.1.5 and I would like it to give out I...

CommScope RUCKUS Community Forums

User Statistics

User Activity

convert AP from unleashed to standalone

unleashed max access points

enabling DHCP server on standalone AP

Re: convert AP from unleashed to standalone

Re: enabling DHCP server on standalone AP