some ap can enter controller ..some ap cannot enter
hi admin...right now im very confuse...refer picture below....same controller ....same version..same firmware...but cannot auto enter to staging zone controller...please help
Forum Posts
R320 AP - WEBUI not loading - 503 service unavailable
Hi All,I have bought a used R320 AP running 6.2.3.103.238 which is intended to added to an existing Unleashed network and to keep costs down for a client who already has a further 11 R320 AP's and 1 R510 (from memory) running as unleased access point...
AP Image Signing: AP with firmware version [102.0.0.0.5] is USI. USI to FSI upgrade is not allowed
hi admin...can help me regarding this problem...i dont know what to do,...but the AP now using R310 standalone firmware ver 102.0.0.0.5.....below the firmware for virtual SZ
R550 not boot up completely
I have a ruckus R550 which does not boot up completely for some reason.Even if I use the POE power or 12V DC - I get the same result.The PWR light turns solid red and after a few seconds it starts flashing green, then becomes solid for a few more sec...
LAN 2 on T610
I am trying to daisy chain an Axis camera to a T610 in mesh mode. I am trunking four VLANs to the Root Mesh AP (one management, two for wireless, and one for LAN2). I see both AP MAC addresses in my switch for the management and LAN2 VLANs.For the ...
Related Self-Help
