I am trying to daisy chain an Axis camera to a T610 in mesh mode. I am trunking four VLANs to the Root Mesh AP (one management, two for wireless, and one for LAN2). I see both AP MAC addresses in my switch for the management and LAN2 VLANs.
For the T610 in mesh mode, LAN2 is on, set to Access Port, Default WAN, and my VLAN untag ID is properly configured. I've tried it configured as Local Subnet (LAN) and it still doesn't work. I've also tried User Side Port and that doesn't help.
Any ideas on how to get LAN2 properly passing traffic?
