Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
For consultation, we are using Proxmox virtual organization to build the Smartzone platform. Currently, we have 2 online APs and 5 online users. We have 30GB of memory, but we have already used about 90% of it. Why?In the later stage, I will increase...
Hi all, We have two T350se managed by Smartzone, and we want to deploy them to two buildings as office extensions.How to set up those units on SZ so we can use them as a network bridge? Thanks.
Hi.Recently, some customers and partners have asked us if they could use Okta for WLAN authentication.In WLAN, 802.1x authentication allows radius authentication, so it is not easy to authenticate using Okta's account information.There is a SAML auth...
Regarding the hot spot (WISPr) authentication issueSmartzone uses hotspot (WISPr) external portal authentication, version 5.2.1 official documentation mentions that HTTPS protocol can be used（ https://sip:9998/login ）Can HTTPS protocol be used for au...
Hi Ruckus.In the Traffic tab of AccessPoint in Smart Zone, you can see the top 10 client usage as shown below.However, it only shows the client's hostname and you cannot check the information about the client. You cannot even copy the hostname.It wou...
