Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...
i use VirtualSmartZone with 30 access point, default Access Point Zone, group, default WLAN Zone and group.There is no problem work with all Access point with WLANs.The scenario is i want to adding one more WLAN for specific Access point only, but ...
Summary:In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google.Network Environment: SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.0.x.R350 (Access Poin...
Summary:In this article, we will look at the steps involved in setting up Guest Portal authentication with Social Media Login, in this case via Google.Network Environment: SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1...
As a Ruckus Technical Support Engineer, I would like to share my experience regarding Smart-roam sticky client control and the commands used to help configure the same from the SZ CLI or the AP CLI:Issue Details:In a multi-AP environment, a client wi...
While configuring a multi-line banner motd on a vSZ/SZ managed Switch using the CLI template option on vSZ/SZ, all the lines should end with delimiting character ^C if the Switch version is 08.0.95, whereas on 09.0.10 all the lines except the last l...
