cancel
Showing results for 
Search instead for 
Did you mean: 

vSZ/SZ SocialMedia Login Guest Portal Authentication with Google

Ambika-leimapok
Internal Employee

Summary:

In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google.

Network Environment:  

  • SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.0.x.
  • R350 (Access Point)

Setup Procedure:

  • In the vSZ/SZ GUI, navigate to ‘Network -> Wireless LANs’ and select ‘Create'.

Ambikaleimapok_0-1663661900782.png

 

  • Name the WLAN, in my setup I named it as ‘SOCIAL_LOGIN’, Authentication Type as "Guest Access" and Method as "Open"

Ambikaleimapok_1-1663661900790.png

 

  • Encryption Options is selected as 'Open' (but it can change based on requirement). 

Ambikaleimapok_2-1663661900793.png

  • Under Guest Access Portal, select 'Social Media Login'
  • In 'Social Media Profile' click '+'icon to create the profile

Ambikaleimapok_3-1663661900798.png

  • Name the social media profile and in Social Auth Option turn 'ON' the toggle for Google and click the 'here' button

Ambikaleimapok_4-1663661900802.png

 

  • If you click on “here” you will be redirect to Google APIs section of your Google account, login, accept terms of service and click on “+ Create Project”

Ambikaleimapok_5-1663661900811.png

  • Enter Project Name and Location and click on Create.

 

Ambikaleimapok_6-1663661900815.png

  • Once the project has been created, go to the OAuth consent screen, and select External and click Create

Ambikaleimapok_7-1663661900832.png

  • Under App information, complete the following steps:
  • For App name, enter the application name.
  • For User support email, select an email address from the list.

 

Ambikaleimapok_8-1663661900839.png

 

Ambikaleimapok_9-1663661900850.png

  • For Developer contact information, enter valid email address and click SAVE AND CONTINUE.

Ambikaleimapok_10-1663661900857.png

  • In the Edit app registration > Scopes page, click SAVE AND CONTINUE.
  • In the Edit app registration > Test users page, click SAVE AND CONTINUE.
  • On the OAuth consent screen, click PUBLISH APP.

Ambikaleimapok_11-1663661900863.png

  • In the Push to production dialog box, click Confirm.

Ambikaleimapok_12-1663661900873.png

  • Under Publishing status, change the status to In production.

Ambikaleimapok_13-1663661900879.png

  • Go to the Credentials page and click CREATE CREDENTIALS and select OAuth client ID.

 

Ambikaleimapok_14-1663661900896.png

Ambikaleimapok_15-1663661900902.png

 

  • Click Create. If successful, Google displays the Client ID and Client Secret, as shown in the following figure. 

Ambikaleimapok_16-1663661900905.png

  • The Google Client ID and Google Secret would be automatically filled once the above steps are performed              

Ambikaleimapok_17-1663661900911.png

  • Then add these Whitelisted Domains:*.geotrust.com, *.google.com, *.gstatic.com
  • The next step is to create a 'Guest Portal Service' by clicking the '+' icon

 

 

Ambikaleimapok_18-1663661900914.png

 

 

  • Enter the 'Portal name' and 'Save' (It can be modified based on requirement).

 

Ambikaleimapok_19-1663661900917.png

 

 

 

For this example, all other settings including VLAN assignment for end-user devices are set to the default values.

Next click 'OK'.

This configuration will be good to go ahead with Social Media login With Google.

Regards,

Leimapokpam Ambika

0 REPLIES 0