RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

Max Vlan number on a single SSID using group dpsk(bound to vlan per dspk) per each room?

We are planing to network design for over 100 shared offices.Devices are SZ144 and R650(mostly).There are over 100 rooms on one floor and we are going to assign group-dpsk per each room in a single SSID. And You are also planning to assign vlan per e...

vSZ Unsupported APs Upload Old Firmware for Zone

Hello,is it possible to upload an old AP Firmware to an Fresh Installed vSZ 5.2.2.0.1161. I would like to have some R700 in a sepprate Zone running with AP Firmware 5.1.2.0.373. But I do not know how I am able to upload old AP Firmware.I only find so...

When using the same Radius authentication server as 2 SSIDs

Hi I am writing because I have an inquiry about the controller and authentication server.1. You are using 2 SSIDs and the same Radius server.2. MAC Authentication + PSK is in use.3. After connecting to SSID A, when connecting to SSID B, it is possibl...

Resolved! LAN Phy Rate from SmartZone REST API

Hello,We have thousands of Ruckus APs and are looking to automate, as manual management is becoming too burdensome. We are looking to check AP LAN Phy negotiated rate and take action if it is not 1 gigabit.From https://community.ruckuswireless.com/t5...

Disable auto authorization of APs in vSZ-H

Hi, I have a vSZ-H running for a client. As of now, APs are on auto-approval.How to disable auto-approval of the APs?Thanks!

CommScope RUCKUS Community Forums

Forum Posts

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

Max Vlan number on a single SSID using group dpsk(bound to vlan per dspk) per each room?

vSZ Unsupported APs Upload Old Firmware for Zone

When using the same Radius authentication server as 2 SSIDs

Resolved! LAN Phy Rate from SmartZone REST API

Disable auto authorization of APs in vSZ-H

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

I'm Forgot admin Password for my SZ100

R550 connects to SZ but does not upgrade firmware

Slow downlink for the R650 registered in vSZ

System Operation

DHCP server on smartzone for wireless clients

SZ124 WLC Newest possible Firmeware Version for th...

I can't try to auth using chap for Test AAA server...

VSZ - Essential 3.6.1.0.227

SmartZone AP Issue

Remote syslog server