RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

|

SmartZone and Virtual SmartZone

RUCKUS SmartZone and virtual SmartZone is the next-generation high performing Wireless LAN controller for enterprises around the world.

Forum Posts

Sorted by:

ASK the Pack

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...

Announcement: RUCKUS SmartZone 6.1.2 Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....

Announcement: RUCKUS SmartZone 7.0.0 Streamlined Product Guides Published on RUCKUS Support Portal

The following RUCKUS SmartZone 7.0.0 *streamlined* product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. RUCKUS SmartZone (ST-GA) Access and Security Services Guide, 7.0....

SZ NAT Design - Can some APs use internal IP while others use External NAT IP?

I've been following the old Smartzone Network-Design-with-NAT guide and something I'm trying to wrap my head around is the AP Connection behaviour when both internal and NAT addresses are reachable.Preferably, we'd like to have new APs out of the box...

WISPr Authentication

Is it possible to allow certain MAC addresses to bypass WISPr authentication on SSID connections and connect directly, and if so, how?

Upgarding sz144 controller to 6.1.2

I am trying to upgrade sz144 controller to 6.1.2 from 5.2.2.0.1563, but it starts the upgrading and then comes back to original screen and on version 5.2.2.0.1563What could be the reason for this?

T750 not connecting to Smartzone Controller

Hi all,I have a Ruckus Smartzone Controller. Version 5.1.0 with 189 R750's. I just purchased a T750 for outside. The T750 has an IP address. I can log into the AP. I ran the command for the AP to look to the zone controller. I can ping the zone...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1