The following RUCKUS SmartZone 6.1.2 product guides have been published on the RUCKUS Support Portal.The PM can share the links below as needed for release announcements. SmartZone 6.1.2 (LT-GD) Public API Reference Guide (ICX Management)SmartZone 6....
hi ,, am working with a new Smart Zone Installation ,,during setup the time was configured correctly and NTP is configured,, now the system time and system-UTC time doesn't match .. is there any way to modify Sytem-utc time. thanks, Anvar
Tunnelling anything inherently lowers maximum packet sizes due to additional overhead. Are there any features/mechanisms available in the Ruckus SZ series solution such as TCP MSS Clamping to prevent packet fragmentation issues when traditional ICMP...
I've just upgraded to 5.2.1.0.515 and I see that there is a new Firewall section in the WLAN policy that covers L2 and L3 ACLs etc. This is great but you have not replicated this in the WLAN templates feature, Consequently there is no way to set an L...
We have connected 3 x controllers to our SCI:1. VSZ Site 12. VSZ Site 23. SCG200One of the VSZs' access points showing "unknown" with no data displayed.Has anyone faced this same issue?**The two VSZ are from the same VM server - could this be an issu...
SZ100 running Controller Version 5.2.1.0.515New, never used R650 on software version 114.0.0.0.1294Multiple R650s fail to join or even be seen by the SZ100 controllers. Even after putting in the controller IP addresses directly on the AP, it still f...
