I have two ICX switches 7150 .
* I was trying to copy the configuration from the switch to TFTP or vise versa
* The TFTP and the switch are on the same subnet , ping successful from the laptop to switch , Ping failed from switch to...
I have T610S AP that I'm using it for testing purpose
I pointed to SmartZone by but I forgot the default credential or I may have changed the default credentials when i ssh to it
now I'm trying to reset to factory default but by SSH to it f...
We are using the Ruckus Virtual Smartzone High Scale controllerver.22.214.171.124.589.We are trying to setup Hotspot WISPr with the custom Login portal and Radius Auth. I have configured the northbound interface with user/password
The northbound interface i...
Hi WIFI Expert I have an ICX7850-48 port using it as a Core router , if we configure two private DNS server on ICX7850 using this command 7850(Config)#ip dns server-address 10.192.0.17850(Config)#ip dns server-address 10.190.0.1will the Icx treat eac...
@jim_michael hi Jim
can you help me explain the CSR process
I’m new to ruckus vsg and I have launched virtual controller on cloud but I haven’t completed the certificate part
it would be greatly appreciate to point me to right direction on where t...
thanks ben , so I found the problem on TFTP blocking UDP traffic but now I have another problem
I can download config file from the switch to PC "TFTP" But cant upload config file from PC "TFTP" to switch , it giving me error code 1 . I l...
I did that , no firewall rule
also I tried different laptop , I thought maybe company laptop has some firewall rule but even the personal laptop didnt work
also I tried to use USB stick but no luck either
@sam_evans thank you for your respond
I have tried all these steps but the default credenatl user/password "super/sp-admin" wont work
not sure if there is any other credential that I could try it