Issue: To Install valid purchased license for 8x10g speed on the interfaces.

[Smiley]

Issue: To Install valid purchased license for 8x10g speed on the interfaces or ports, as running Trial license for 45 days on the units.

• Enter the show license installed command to verify the licenses already running or installed on the device.

Test-switch# show license installed

 Unit  License Name    L3 Prem  PoD    Speed  Ports  MACsec   SerialNo(L3/ICX7250) SerialNo(PoD/MACsec)

1     l3-base-2X10G      No           Yes      10G       2        NA

2     l3-base-2X10G      No           Yes       10G      2       NA

• Enter the show version command to verify license details. The Current License field displays the license package you have currently installed on the device.

Test-switch# show version

 Copyright (c) Ruckus Networks, Inc. All rights reserved.

    UNIT 1: compiled on May 14 2023 at 10:06:30 labeled as SPS08095j

      (31457280 bytes) from Primary SPS08095j.bin (UFI)

        SW: Version 08.0.95jT211

      Compressed Primary Boot Code size = 786944, Version:10.1.26T215 (spz10126)

       Compiled on Tue Dec 29 12:43:15 2022

    UNIT 2: compiled on May 14 2023 at 10:06:30 labeled as SPS08095j

      (31457280 bytes) from Primary SPS08095j.bin (UFI)

        SW: Version 08.0.95jT211

      Compressed Primary Boot Code size = 786944, Version:10.1.26T215 (spz10126)

  HW: Stackable ICX7250-48-HPOE

==========================================================================

UNIT 1: SL 1: ICX7250-48P POE 48-port Management Module

      Serial  #:XXX111XXXXY

    Software Package: BASE_SOFT_PACKAGE   (LID: abcdefghijk)

      Current License: l3-base-2X10G

      P-ASIC  0: type B344, rev 01  Chip BCM56344_A0

==========================================================================

UNIT 2: SL 1: ICX7250-48P POE 48-port Management Module

      Serial  #:YYY111YYYXY

      Software Package: BASE_SOFT_PACKAGE   (LID: lmnopqrstuv)

Current License: l3-base-2X10G

==========================================================================

• Enter the license install perpetual command, followed by the unit number and the purchased license name.

# license install perpetual 1 8x10g
# license install perpetual 2 8x10g

• Enter the license set serial command for POD followed by serial number received with the Certificate of Entitlement (CoE) after license activation.

#license set serial 1 pod <TEST123>
#license set serial 2 pod <TEST456>

• Confirm the license installation with the show license installed command.

 Test-switch#show license installed

Unit   License Name  L3 Prem  PoD    Speed  Ports  MACsec   SerialNo(L3/ICX7250) SerialNo(PoD/MACsec)

1     l3-base-8X10G      No            Yes     10G      8         NA                    TEST123         

2     l3-base-8X10G      No            Yes     10G       8        NA                    TEST456