How to set privilege mode access on the ICX switches version 9010 and 10.0.00

[Chandini]

Issue:

Command “aaa authentication login privilege-mode” was removed in 9010 and 10.0.00 versions.

This command was missing in certain 9010 and 10.0.0 versions. Below is the example the output looked like.

ICX7850-48FS Router(config)#aaa authentication login

  default   The default authentication list

In the above output it is noticed that privilege mode option is missing.

Solution:

This command was added back in version 9010h and below is a example from lab output where 7650 switch is running on 9010h version

ICX7650_test(config)#aaa authentication login

  default          The default authentication list

  privilege-mode   Take user to privilege mode after successful authentication

ICX7650_test(config)#aaa authentication login privilege-mode 

For 8200 switches this command was added back in version 10.0.10b and above and below is an example

ICX8200_test(config)#aaa authentication login

  default          The default authentication list

  privilege-mode   Take user to privilege mode after successful authentication

If you are looking to enable privilege mode on the switch and switches are on 9010 and 10.0.00 versions then they would need a upgrade to 9010h and above or 10.0.10b and above.

[inphobia]

---

If you are looking to enable privilege mode on the switch and switches are on 9010 and 10.0.00 versions then they would need a upgrade to 9010h and above or 10.0.10b and above.

---

side note: excluding 10.0.10d since it was removed by accident in that release.(issue FI-296313), but i guess it will return in the next version.

[Chandini]

Hi Inphobia 

Noted. Thanks