Cross connection not supported in a 3m DAC cable for 7150 switch

[Chandini]

Issue noticed:

When a 3m DAC cable connection is made in 7150 between port 1/3/1 to 2/3/3

The link remains down, and the two switches will not stack with each other.

Details from Ruckus optic guide:

Link to Ruckus optic guide for reference:

• https://www.commscope.com/globalassets/digizuite/61722-ds-ethernet-optics-family.pdf

Below is link to KBA which briefs about the problem:

• https://support.ruckuswireless.com/articles/000011828

Technical Bulletin link:

• https://support.ruckuswireless.com/technical_support_bulletins/607

[inphobia]

kba link gives me an "aricle does not exist", even when logged in. perhaps i don't have the right permissions, or perhaps the link has changed.

[inphobia]

https://support.ruckuswireless.com/articles?product_id=83-Ruckus_ICX_Switches

"search help" is also a dead link

[Chandini]

Hi Inphobia 

Ack and Noted. I have added "technical bulletin link " that has the same details which was mentioned in the article. Let me check about the KBA article link internally.

Thanks