RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

2nd cable causes wireless clients to not be able to connect r510

I am testing a ruckus 510 in standalone mode V: 106.1.0.0.469 I have managed to set it up fine, plugged into a POE switch and it works great with one cable as soon as I plug a 2nd cable in I cannot connect to the AP from any wireless device. Both Eth...

How to manage AP's on local network

I am new to Ruckus. I have three R310 ap's with firmware 5.1 on my lan. I would like to publish 2 wifi networks, shared on all thre of them. What software do i use to manage and configure these ap's? I am being told by support I have to buy support a...

What can cause an zf7341 AP to use more than 80% CPU without any logged in user?

APN01_CPU is a Zabbix item that monitors CPU utilization by the AP. APN01 refers to a Ruckus AP model ZF7341. On 07/21/2019, with no device connected, the item trigger was triggered after detecting that more than 80% of the CPU was being used. What m...

Access point cannot connect to the SZ100

Hi,We are deploying a new SZ100 with H320 Access Points, after configuring the SZ100 and set the controller IP into the H320, I found that the APs do not connect to the SZ100. APs and SZ100 are in the same subnet and they can also ping each other. Fr...

I have wireless 2741 802.11g outdoor AP.unable to login and wifi was not working too.it will show n/w of wifi bt wil not connect to it...

hi.. I have ruckus wireless point zoneflex 2741 802.11g outdoor access point.. unable to login and wifi was not working too... it will show network of wifi but will not connect to it...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1