RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

5.1.1.0.598 & 5.1.1.0.624 ap reboot in SZ100 - Access points R710 & R600 rebooting automatically, While doing changes on unused SSID's

5.1.1.0.598 & 5.1.1.0.624 ap reboot in SZ100 - Access points R710 & R600 rebooting automatically, While doing changes on unused SSID's

2nd cable causes wireless clients to not be able to connect r510

I am testing a ruckus 510 in standalone mode V: 106.1.0.0.469 I have managed to set it up fine, plugged into a POE switch and it works great with one cable as soon as I plug a 2nd cable in I cannot connect to the AP from any wireless device. Both Eth...

How to manage AP's on local network

I am new to Ruckus. I have three R310 ap's with firmware 5.1 on my lan. I would like to publish 2 wifi networks, shared on all thre of them. What software do i use to manage and configure these ap's? I am being told by support I have to buy support a...

What can cause an zf7341 AP to use more than 80% CPU without any logged in user?

APN01_CPU is a Zabbix item that monitors CPU utilization by the AP. APN01 refers to a Ruckus AP model ZF7341. On 07/21/2019, with no device connected, the item trigger was triggered after detecting that more than 80% of the CPU was being used. What m...

Access point cannot connect to the SZ100

Hi,We are deploying a new SZ100 with H320 Access Points, after configuring the SZ100 and set the controller IP into the H320, I found that the APs do not connect to the SZ100. APs and SZ100 are in the same subnet and they can also ping each other. Fr...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1