ZD 3000 AP's upgrading loop
I have A ZoneDirector 3000 with firmware version 10.2.1.0 build 75. when i try to adopt T300 Or R500 Ap's it's stuck in a loop of Upgrading Ap's Firmware.Can You Please Help me as soon as possible?Thanks.
Forum Posts
client disconnected from access point due to 4 way handshake failed (timeout expired)
I have access point that is controlled by Smartzone 100. Sometimes, clients who have connected to the access point are suddenly disconnected from the access point and some time later can be connected again automatically. For wlan i use a radius for a...
Vlan Pool/Large Vlan and mDNS/Airplay
We currently have our SZ100 and R720 system configure using vlan pools. I have the following vlan pools configured:SchoolOwnedStaff - Pool with 2 /24 subnetsSchoolOwnedStudent - Pool with 2 /24 subnetsStaffBYOD - Pool with 2 /24 subnetsStudentBYOD -...
SmartZone 3.6.1.0.354 to ZoneFlex 9.8.3.0.14
I am new to Ruckus equipment and setting this up for my new house.Running a ZoneDirector ZD1100 with the following firmware: 9.8.3.0I've got three Ruckus 7982's that I just realized were previously used with a SmartZone controller. All three APs are ...
R600 SSH across L3 failure
Hello, I can SSH in to this R600 access point when my laptop is connected to the same VLAN but unable to SSH from another VLAN.This would normally mean a default gateway problem, however I confirm the default gateway of the access point is correct an...
Related Self-Help
