We were supplied with 14 R320 and a zonedirector 1200, why is the R320 not showing as Mesh supported?
Are the R320 mesh compatible on the zonedirector?
Forum Posts
Second Ethernet Port on R720 Unleashed for Ethernet to Switch Possible?
Is it possible to set up Router>R720 2.5g Input>Switch on 1g ethernet output on the Ruckus Unleashed firmware? I'm trying to run from the output to a switch so that I can change out some switches in the future without disrupting the wifi.In the futur...
R700 no link on poe interface blinks on pwr dir
Weird issue with my R700.It powers up on POE from my POE switch.It's using about 7W.I get no link on the PoE interface, so the nic is down.The ap has been powered on for 30min, and the PWR and DIR leds are blinking.Anything I can try out?I tried rese...
R510 5ghz abysmal
Perhaps some kind soul can clarify something for me. I have two R510s covering roughly 3000 sqft. 2.4ghz coverage seems reasonable. I was under the impression that the Unleashed mesh would handle roaming and essentially be an Eero/Velop equivalent. ...
3 APS and one ZD
3 APS on same network with ZD. Network configured, APS booted up approved automatically but the status shows disconnected .
