RUCKUS Indoor and Outdoor Access Points (APs)

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

t710 to t710 wireless connection help

I am using two T710’s. One is at a building approximately 220’ away at my IDF. My goal is to shoot a wireless connection to my MDF where my other T710 is located. Both are on PoE switches. The documentation is vague concerning setup. I do see both 71...

Setting "Load balancing" in high-density environment

Hardware:ZD1200, firmware 10.2.1.0 build 129Case:a lot of people (e.g. >150) in open-space type area. 8-10 access points, channels set manually, OFDM only, BSS Min rate 12 mbps and few other tweaks - nevermind.Some smartphones are not roaming. I want...

How much time Smart Zone 100 needs to boot/to start working after power failure?

I configured two smart zone controllers to work in a cluster. Was checking out how fast (or slow) it will boot up/start working after power failure. It is suspicious because it takes too long (10-15min) to boot up and start working. Also, two control...

What is the best solution for home?

Which series and AP's is the best for home and SMB? Not very large territory with a lot of glass, partitions, clothes, may be pipes, refrigerator etc.

R510 Unleashed Clients no getting IPs from DHCP

There is an r710 connected to the same switch and doesn't have the same problem. When I assign a static IP to the client there is still no network access. The only thing that works is enabling 'randomized MAC' on the client, that way it gets an IP fr...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1