cancel
Showing results for 
Search instead for 
Did you mean: 

3 APS and one ZD

hanif_ghitt
New Contributor
3 APS  on same network  with ZD.  Network configured,  APS  booted  up approved automatically but the  status  shows  disconnected .
3 REPLIES 3

hanif_ghitt
New Contributor
I have  factory  reset all devices and the  same  result is achieved  , the  three APs  shows disconnected !!

sanjay_kumar
RUCKUS Team Member
Hi Hanif,

Can you give us the AP details about the Model and Software version on it?
On the ZD, click on the AP and check for the events.
What is the ZD software version?

Have you contacted our Support team on this?

Regards,
Sanjay Kumar

michael_brado
Esteemed Contributor II
Is there a Router and DHCP server on the network, all one subnet?

Can you connect a PC and get an IP address, that can ping your ZD IP ok?

Can your connected PC ping the APs (if you look up their MACs in your DHCP lease table)?

This will help troubleshoot.