RUCKUS SmartZone (SZ) and Virtual SmartZone (vSZ)

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

Please visit https://support.ruckuswireless.com/technical_support_bulletins/642 for details Bulletin OverviewThis Technical Support Bulletin describes a software limitation regarding the SZ upgrade from SZ 6.1.2.0.487 Patch-3 GD Release to SZ 7.0.0 P...

SZ / SCG Admin roles and AAA Servers - Priority?

I'm looking through the documentation below trying to figure out if once we configure TACACS+, will the local accounts still be usable?https://docs.commscope.com/bundle/sz-611-adminguide-sz100vsz/page/GUID-B9789B57-C58B-4215-A83A-AC05BA1458C4.htmlFor...

Switches Suddenly Don't Connect to VSZ

Hi all,Suddenly on Saturday, switches won't connect to VSZ from over the WAN or even on the same subnet as the control IP.HTTPS and SSH are responding on the control IP with the appropriate https certificate and ssh keyThe log shows a blank error - ...

Resolved! Can I cancel the session timeout

hi everyone • Session Timeout: Sets a time limit (in minutes) after which users will be disconnected from the hotspot service and required to log in again. Can I cancel the session timeout？ If I reach the time limit for wireless acces...

smartzone 不断重新认证

咨询一个问题，smartzone开放3个无线信号，信号1开启身份认证采用ldap服务，另外2个采用密码加密认证，链接信号1身份认证通过，切换到信号2或3，再切回信号1时需要重新身份认证。身份认证时效宽限期未到。

Resolved! vSZ 6.1.1.0.959 - Older models (R500,T301s) do not broadcast WLAN.. (not assigned) - solved

Hi to all... having some older APs migrated to my new vSZ i noticed that any access point running on 5.2.2.0.2064 fw (in the corresponding zone) do not have any WLAN assigned on them and they do not broadcast at all... My licenses are ok, all access ...

Forum Posts

Technical Support Bulletin TSB-2024-007 High Severity: SmartZone Upgrade from 6.1.2.0.487 Patch-3 GD

SZ / SCG Admin roles and AAA Servers - Priority?

Switches Suddenly Don't Connect to VSZ

Resolved! Can I cancel the session timeout

smartzone 不断重新认证

Resolved! vSZ 6.1.1.0.959 - Older models (R500,T301s) do not broadcast WLAN.. (not assigned) - solved

Welcome to RUCKUS Community!

Lennar SmartHome Customers

Related Self-Help

Syslog and Palo Alto User-ID

Replacement switch not syncing up with SmartZone

REST API “Permission Denied” Error When Accessing ...

I believe I've lost the CLI enable password for my...

vSZ-H v6.1.2 Introducing H550 to environment

Migration from SZ100 (3.5.1.0.862) to vSZ-E – Best...

Regarding the hot spot (WISPr) authentication issu...

Configuring 3 SSIDs with 3 different VLANS and get...

A request for additional features.

What is Monitoring APs in Monitor dashboard?